MPK - The All-in-half laser marker
The smallest DPSS industrial laser marker ever made, MPK is meant to complement, when not to replace, more traditional printing heads, such as thermal transfer and ink-jet technologies, providing superior performances while releasing the user from the burdens of consumable materials.
The MPK is available in two basic versions:
OEM- The laser unit is boxed, as per the image.OPEN FRAME- The laser unit is provided as a kit for custom integration.
The standard configuration of the MPK comprises a 160mm (M39) F-Theta lens and a Full Raster driver control board. Kindly refer to your sales rep. for alternative configurations.
Technical specifications
| Model | MPK OEM | |
| Part number | MX3MI02MPK000 | |
| Lens configurations | 100S, 160S, 160L | |
| Marking area | 50x50, 90x90, 120x120 | mm2 |
| Working distance | 116±0.5, 178±0.5, 178±0.5 | mm |
| Output power | 2 | W |
| Mode of operation | High frequency pulsed | |
| Wavelength | 1064 | nm |
| Repetition rate | 40±10 | KHz |
| Pulse energy | 50 | µJ |
| Pulse duration | 3 | ns |
| Peak power | 22 | KW |
| Beam quality | < 2 | M2 |
| Safety class | Class 4 laser product | |
| Aiming beam | Not aplicable | |
| Operating voltage | 24 DC ±10% | V |
| Maximum current | ≤ 4 | A |
| Power consumption | 60 | W |
| Protection class | Class II (double insulation) | |
| NEMA enclosure | type 2 (indor use only) | |
| Protection rating | IP2x | |
| Mechanical vibrations | Not allowed | |
| Equipment mobility | Stationary | |
| Cooling method | Forced air | |
| Working temperature | 10 - 35 | °C |
| Storage temperature | 0 - 40 | °C |
| Relative humidity | < 85 (non condensing) | % |
| Phisical dimensions | 108x108x130 (without lens) | mm3 |
| Weight | 1.5 (without lens) | Kg |
| Connectivity | USB, Ethernet | |
| Certifications |   | |
| Safety requirements | EN60825-1 - EN62368-1 (where applicable) | |
| Electromagnetic compatibility | EN61000-6-2 - EN61000-6-4 (industrial environment) |
Note: This is a component intended for incorporation into a laser product and such requires additional features for laser safety and to comply with IEC 825 and with 21 CFR 1040-10 regulartions. Product specifications may be subject to change without notice.